YM-HC 1000W-6000W Pure Sine Wave Inverter Residential Commercial Use

HC series pure sine wave inverter is a versatile and high-performance power solution that offers reliable and clean power for various applications. Its high conversion rate of 88% ensures efficient power delivery, while its advanced features such as power factor correction and multi-stage charging make it a durable and efficient inverter for both residential and commercial use.

1. Contains four functions of mains bypass, mains charging, inverter,UPS, fully automatic switching

2. The efficiency is 3~5% higher than the ordinary power frequency series, and the self-consumption is reduced by 30~50%

3. DIP switch selection: battery undervoltage point, input AC range, energysaving mode, priority mode

4. Remote communication interface RJ11/RJ45/RS232/485 remote control panel (optional)

5. Support PC software monitoring, support WIFI 4G module expansion to realize app cloud monitoring (optional)

6. Pure sine wave output, input and output completely isolated design

7. Contains AC four-stage charging mode, and the charging current is automatically adjusted

8. It can be matched with commercial power, diesel engine power generationand other mixed power supply

9. Can withstand 3 times the rated power start, excellent load capacity

10. LED display working status, LCD remote display operating parameters

11. Undervoltage/overvoltage/short circuit/overload/over temperature protection

12. Pure sine wave series inverters are suitable for renewable energy systems, utilities, RVs,Marine and emergency applications.

Parameter
MODEL(HC)	1kw	1.5kw	2kw	3kw	4kw	5KW	6KW
Continuous Output Power (W)	1000W	1500W	2000W	3000W	4000W	5000W	6000W
Rated input voltage	12VDC/24VDC/48VDC		12VDC/24VDC/48VDC		24VDC/48VDC
Mains mode specifications:
Input voltage waveform	Sine wave (mains or generator)
Rated input voltage	100V/ 110V/ 120V/220V/230V/240Vac
Low voltage shutdown point	92/ 184Vac±4%
Low pressure recovery point	97/ 194Vac ±4%
High voltage shutdown point	127/253Vac±4%
High pressure recovery point	121/243Vac±4%
Maximum AC input voltage	135/270V rms

Rated input frequency	50Hz/ 60Hz (automatic detection)
Low voltage recovery point frequency	40.5+0.3Hz ;
Low voltage cut-off point frequency	40+0.3Hz;
High voltage recovery point frequency	69.5+0.3Hz;
High voltage cut-off point frequency	70+0.3Hz ;
Output voltage waveform	Consistent with the input voltage waveform
Overload protection	Circuit breaker start
Short circuit protection	Circuit breaker start
Power Efficiency	>95%
Conversion current	30A
Conversion time (Ac to Dc)	10ms
Bypass switching current	Yes
Bypass maximum load current	30A
Output voltage waveform	Sine wave
Power factor	0~1.0
Rated output voltage (V)	120/230Vac
Rated output frequency (Hz)	60/50Hz ± 0.3Hz
Automatic tracking main frequency (Hz)	Yes (from the first connection)
Output voltage range	±2% rms
efficient	>80%
Overload protection (SMPS load)	(110%<load<125%) ±10%: disconnect the output voltage after 15 minutes (125%<load <150%) ±10%: disconnect the output voltage after 10 seconds Load >150% ±10%: Disconnect the output voltage after 20 seconds
Peak capacity( 10s)	3000VA	4500VA	6000VA	9000VA		1200VA	15000VA	18000VA
start the motor	1HP	1.5HP	2HP	3HP		4HP	5HP	6HP
Short circuit protection	Current limit (power off after 10s)
Circuit breaker size	15A		20A		30A		40A
Rated DC input voltage	12V / 24V/48V
Minimum DC terminal voltage	10V/20V/40V
Undervoltage warning	10.5Vdc ± 0.3Vdc (12V power supply)
DC input voltage is too low, automatic power off	10.0Vdc ± 0.3Vdc(12V power supply)
Input overvoltagewarning and power failure	16Vdc ± 0.3Vdc (12Vpower supply)
Input overvoltage recovery	15.5Vdc ± 0.3Vdc(12V power supply)
Power saving	load ≦2W
Inverter dimensions	360*185* 180mm		420*185* 180mm			597* 195* 190mm